Install Location : /opt/Xilinx
LMC_HOME = ${XILINX}/smartmodel/${PLATFORM}/installed_lin
PATH = ${XILINX}/bin/${PLATFORM}
LD_LIBRARY_PATH = ${XILINX}/bin/${PLATFORM}:/usr/X11R6/lib
XILINX = /opt/Xilinx
NPX_PLUGIN_PATH = ${XILINX}/java/${PLATFORM}/jre/plugin/i386/ns4
CPLD
Design Environment Tools
Virtex4
Cable Drivers (Important OS Info Below)
Virtex/VirtexE/Spartan2/Spartan2E
Virtex2/Virtex2P/Spartan3/Spartan3E
Standalone Programming Tools

==============================================================================

Install Location : /opt/EDK
XILINX_EDK = /opt/EDK
PATH = ${XILINX_EDK}/bin/${PLATFORM}:${XILINX_EDK}/gnu/microblaze/${PLATFORM}/bin:${XILINX_EDK}/gnu/powerpc-eabi/${PLATFORM}/bin
LD_LIBRARY_PATH = ${XILINX_EDK}/bin/${PLATFORM}
Platform Studio Tool and Processor IP

==============================================================================



Hi Tim,

As John mentioned it runs under Kernel 2.6 without the parallel port driver :-(
Where did you fail?

We installed ise to /opt/xilinx/ise6_3 and edk to /opt/xilinx/edk6_3
Here are env variables that have to be set (by sourceing the two scripts)

/opt/xilinx/ise6_3/settings.sh:

#! /bin/sh
XILINX=/opt/xilinx/ise6_3
export XILINX
NPX_PLUGIN_PATH=${XILINX}/java/lin/jre/plugin/sparc/ns4
export NPX_PLUGIN_PATH
if [ -n $LD_LIBRARY_PATH ]
then
LD_LIBRARY_PATH=${XILINX}/bin/lin:${LD_LIBRARY_PATH}
export LD_LIBRARY_PATH
else
LD_LIBRARY_PATH=${XILINX}/bin/lin
export LD_LIBRARY_PATH
fi
PATH=${XILINX}/bin/lin:$PATH
export PATH
LMC_HOME=${XILINX}/smartmodel/lin/installed_lin
export LMC_HOME
LD_ASSUME_KERNEL=2.4.7
export LD_ASSUME_KERNEL
DISPLAY=:0
export DISPLAY

/opt/xilinx/edk6_3/setup.sh:

export XILINX_EDK=/opt/xilinx/edk6_3
export LD_LIBRARY_PATH=$XILINX_EDK/bin/lin:$LD_LIBRARY_PATH
export PATH=$XILINX_EDK/bin/lin:$XILINX_EDK/gnu/microblaze/lin/bin:$XILINX_EDK/gnu/powerpc-eabi/lin/bin:$PATH

Hope this helps

Jan